Triveni Chemicals

Calcium Lignosulfonate 8061-52-7 is Powder yellow. it is also known as Calcium Lignosulphonate, Lignosulfonic acid calcium salt, Lignin calcium sulfonate and Calcium Lignin sulfonate. Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Benzaldehyde 100-52-7 is colorless liquid
strongly refractive. it is also known as Benzenecarbaldehyde. it is use in Flavor to foods, Pharmaceuticals and Plastic additives Industry. Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Borax Decahydrate (1303-96–4) is white solid. it is also known as Sodium Borate, Sodium tetraborate and Disodium tetraborate. it is use in Glass, Textiles, Leather, Adhesives, Paints, Soaps, &, detergents and Ceramics Industry. Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Silico Manganese is Solid.Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.Accidental Release Measures: Eliminate all ignition sources (if Flammable). Dispose of according to local and regional authority requirements.

Manganese compounds were in use in prehistoric times; paints that were pigmented with manganese dioxide can be traced back 17,000 years. The Egyptians and Romans used manganese compounds in glass-making, to either remove color from glass or add color to it. Manganese can be found in the iron ores used by the Spartans. Some speculate that the exceptional hardness of Spartan steels derives from the inadvertent production of an iron-manganese alloy.

Manganese is essential to iron and steel production by virtue of its sulfur-fixing, deoxidizing, and alloying properties. Steel making, including its iron making component, has accounted for most manganese demand, presently in the range of 85% to 90% of the total demand. Among a variety of other uses, manganese is a key component of low-cost stainless steel formulations and certain widely used aluminum alloys.

Molybdenum is a transition metal with an electromagnetically of 1.8 on the Pauling scale and an atomic mass of 95.9 g/mole.[2] It does not react with oxygen or water at room temperature. At elevated temperatures, molybdenum dioxide is formed in the reaction

In its pure metal form, molybdenum is silvery white and very hard, though it is somewhat more ductile than tungsten. It has a melting point of 2623°C, and only tantalum, osmium, rhenium, and tungsten have higher melting points.[4] Molybdenum burns only at temperatures above 600°C.[5] It also has the lowest heating expansion of any commercially used metal.[6]

Molybdenum has a value of approximately $65,000 per tonne as of 4 May 2007. It maintained a price at or near $10,000 per tonne from 1997 through 2002, and reached a high of $103,000 per tonne in June 2005.

P-Toluoyl chloride 874-60-2 is clear, liquid. it is also known as 4-Methylbenzoyl chloride, 4-Toluoyl chloride, P-Methylbenzoyl chloride and Para Toluoyl chloride. it is use in Organic Synthesis and Synthesis Industry. Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Molybdenum is a transition metal with an electronegativity of 1.8 on the Pauling scale and an atomic mass of 95.9 g/mole.[2] It does not react with oxygen or water at room temperature. At elevated temperatures, molybdenum trioxide is formed in the reaction 2Mo + 3O₂2MoO₃.^[3]

In its pure metal form, molybdenum is silvery white and very hard, though it is somewhat more ductile than tungsten. It has a melting point of 2623°C, and only tantalum, osmium, rhenium, and tungsten have higher melting points.^[4] Molybdenum burns only at temperatures above 600°C.^[5] It also has the lowest heating expansion of any commercially used metal.^[6]